Explosion Proof Traffic Light - Class 1 & Class 2 Signal Stack Light - Colored Lamps $250 - $500 Wavelength: The top two rows

Wavelength: The top two rows of LEDs are split between 850nm and 940nm

This fixture uses a special ballast and bulb combination to produce ultraviolet light

000 Total Lumen Output Lamp Control: Individual Switches per Light Head Independently Adjustable Light Heads Independently Switched Light Heads Mast Length: 14 feet - 30 feet Dial-in Adjustability per light head Weight: ~600 lbs 98% Transmission High Purity PMMA Optics Materials: Steel Multiple LED Banks for Heat Dispersion Finish: Powder Coated - Gloss Blue 125 Lumens Per Watt Efficiency Voltage: Universal 100-277 VAC

992   Ambient Operating Temp Range: -50°C to +65°C   Operating Temp Rating: T5   Housing Material: Copper Free Cast Aluminum   Housing Finish: Epoxy Powder Coated - Grey Lens Material: Hardened Borosilicate Glass Gasket Material: Silicone Mounting: Adjustable Flat Surface Mount U-Bracket Wiring: 10` 16/3 SOOW w/ Flying Leads Wiring Hub: 3/4" NPT

Operators on the explosion proof VFD can be used to control the unit

Explosion Proof Traffic Light - Class 1 & Class 2 Signal Stack Light - Colored Lamps $250 - $500 Wavelength: The top two rowsSpecifications Additional Information EPL TL 4X10W C U. L Ratings Lamp Type: LED United States & Canada Colors: Red, Green, and Blue Steady Burn; Yellow Strobe (One of Each) Class I, Division 1 Groups C and D Watts: 10 Watts Per Lamp 40W Total Class II, Division 1 Groups E and F Voltage: 120 277 Volts AC, 12 or 24V AC or DC Class III, Groups E, F and G Lighting Configuration: Steady Burn IP67 (water proof) Mounting: Ceiling, Wall, Flat Surface T3C