3/4" Simpson MCR07512 Rebar Cutter Finish Nails Alignment: Ensure the hanger is

Alignment: Ensure the hanger is fully seated around the joist for a tight

Equipment supports in corrosive environments

Suited for board-to-steel applications with steel up to approximately 0

Square Single Channel 2-Hole Post Base - 304 Stainless Steel is a post base designed to fasten Strut Channel to the floor

Whether used for residential

3/4" Simpson MCR07512 Rebar Cutter Finish Nails Alignment: Ensure the hanger isWhen hole placement conflicts with rebar or wire mesh, these bits allow the rebar to be removed so the hole can be drilled to the proper depth. Simpson rebar cutters are separate from shanks. A shank adaptor designed for the rotohammer in use is required (sold separately). Shanks work will all sizes of rebar cutters. The overall length of this rebar cutter is approximately 15".